- $9.95 flat shipping
- Fitment check
- Ask ReV
1 of 2Check if it fits your bike
In stock — ready to ship
Ships for $9.95 flat · lower 48
Shipping & returns
- One flat rate per order, no matter how many items are in it.
- Easy returns / exchanges, no restocking fee on riding gear. Returns need an RMA from your order page.
- Shipping policy · Returns & exchanges
Questions about fit or sizing? Ask ReV
Jagg Oil Coolers Hose Finishers are anodized aluminum end pieces with integrated worm-drive hose clamps, supplied as a 4-pack in black. Each one finishes off a push-on hose end and clamps it in place, so you don't need a separate clamp.
Check the hose and fitting before you order. The integrated clamps are 7/8" and fit plain rubber or braided/jacketed oil hose of 3/8" (-06). These finishers are intended to cover single-barbed hose ends of the push-on style. If your oil cooler or oil line setup uses barbed push-on ends, and you want a clamped, black anodized look on a street bike, this is the style of part to consider. If your setup uses AN-style fittings, look at a different solution.
- Hose finishers with integrated worm-drive hose clamps
- Hose finishers are designed to fit over push-on style single-barbed hose ends and will not fit over AN-style adapter fittings or Jagg/susa AN-PushLock hose ends
- Size 7/8" integrated hose clamps, suitable for 3/8"(-06) plain rubber or braided/jacketed oil hose
- Aluminum construction
| Mounting Style | Clamp |
|---|---|
| Color/Finish | Black / Anodized |
| Base Color | Black |
| Riding Style | Street |
| Material | Aluminum |
| Units | 4 Pack |
| Dimensions (L × W × H) | 4" × 2" × 1.25" |
| Weight | 0.15 lb |
