- $9.95 flat shipping
- Fitment check
- Ask ReV
1 of 4How to check your bar size
- Measure the outside of your handlebar where the grip goes: calipers, or wrap a strip of paper around it and divide its length by 3.14.
- 7/8″ (22 mm) is the usual size on metric street, sport, dirt and ATV bars.
- 1″ (25.4 mm) is the Harley-Davidson size, used by most US cruisers too.
- Fat (tapered) bars are 1-1/8″ (28.6 mm) at the clamp but still 7/8″ where the grips go — they take 7/8″ grips.
Fits 17 models, including:
- Harley Davidson Electra Glide Police FLHTPI 2008–2020, Electra Glide Ultra Classic Low FLHTCUL 2014, FLHT Electra Glide 2008–2009, 2019–2020
Or check your bike
Sold out
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Details
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
Ships for $9.95 flat · lower 48
Shipping & returns
- One flat rate per order, no matter how many items are in it.
- Easy returns / exchanges, no restocking fee on riding gear. Returns need an RMA from your order page.
- Shipping policy · Returns & exchanges
Questions about fit or sizing? Ask ReV
The Drag Specialties 1" Ape Hanger Handlebar is a gloss black steel bar with a 14" rise for riders who want a tall, classic ape-hanger look. It is made from seamless steel tubing in a 1" diameter, with 1" clamping and controls areas, and it is made in the USA.
On the numbers, it is 38" wide with a 13" center width and 7-1/2" of pullback. The center is knurled, and the bar is slotted for internal wiring and notched for throttle-by-wire, so it suits late-model setups as well as older cable-throttle bikes. It also accepts heated grips. Sold as a single bar and listed for street riding, it will put your hands well above the shoulder line, so think about cable, brake line and wiring length when planning the install.
- Seamless steel tubing
- Knurled and slotted for internal wiring
- Made in the USA
Harley Davidson
- Electra Glide Police FLHTPI 2008–2020
- Electra Glide Ultra Classic Low FLHTCUL 2014
- FLHT Electra Glide 2008–2009, 2019–2020
- FLHTC Electra Glide Classic 2008–2013
- FLHTCU Electra Glide Ultra Classic 2008–2019
- FLHTCUL Electra Glide Ultra Classic Low 2015–2016
- FLHTCUSE CVO Electra Glide Ultra Classic 2008–2013
- FLHTCUTG Tri Glide Ultra 2009–2016
| Handlebar Diameter | 1" |
|---|---|
| Rise | 14" |
| Clamping Diameter | 1" |
| Controls Diameter | 1" |
| End Rise | 14" |
| Features | Notched for Throttle-By-Wire / Internal Wiring / Slotted / Knurled Center / Accepts Heated Grips |
| Color/Finish | Black / Gloss |
| Material | Steel |
| Center Width | 13" |
| Pullback/Sweep | 7-1/2" |
| Riding Style | Street |
| Base Color | Black |
| Finish | Gloss |
| Type/Bend | Ape Hanger |
| Dimensions (L × W × H) | 39.25" × 17" × 7.5" |
| Weight | 4.36 lb |
Similar handlebars
All handlebars →- Drag SpecialtiesHandlebar Riser Sockets$143.05 – $171.67In stock · 3 options

- Todd's CycleMoto 2.0 Handlebar$142.45 – $193.75In stock · 16 options

- Khrome WerksStreet-X Handlebars$142.45 – $149.95In stock · 6 options

- ODIV-Twin MOTO Handlebar$142.45 – $184.95In stock · 6 options

- Todd's Cycle1" Moto Bar Handlebar$142.45 – $163.35In stock · 4 options

- Khrome Werks1" Narrow +2 Sweeper Handlebar$142.45In stock

- Baron1" Starbar Handlebar$140.55 – $194.70In stock · 2 options

- Baron1" Yamaha Touring Handlebar$140.55 – $194.70In stock · 2 options

