NGK Spark Plug R2525-10
NGK

Spark Plug R2525-10

Item # 2-R2525-10 · MFR # 5281 · UPC 087295152812

Nickel (standard)

$57.90MSRP $60.95each

Free members earn $0.58, Gold $2.90, Elite $5.79 in CBC credit. Membership

In stock — ready to ship

Fits 274+ models, including:

  • Yamaha YZ250 1982, 1984–2011, YZ125 1982, 1984–1991, 1993–2011
  • KTM 250 SX 1997–2022
Or check your bike

Plug · R2525-10 (112)

How many plugs?

Check how many your engine takes: one per cylinder on most bikes (2 for twins, 4 for inline-fours). Twin-spark heads take two per cylinder.

Ships for $9.95 flat · lower 48

Shipping & returns

Questions about fit or sizing? Ask ReV

The NGK Spark Plug is a replacement ignition part from a family of 141 variants, so you can match the plug number to your engine instead of settling for a near fit.

Two substitution notes come with the family. The ILKR8Q7 can be used in place of the ILKR8Q, and the BPR8ES can be used in place of the BPR8ES-S. It also carries a "Snow Cat Only" note, so if your machine is a snowmobile, or if you are not sure the note applies to the part you want, check it against the specific variant before you order. No materials, electrode type, or thread dimensions are given for the family as a whole, so confirm those details on the individual part number against your owner's manual.

  • SNOW CAT ONLY
  • ILKR8Q7 Spark plug can be used in place of ILKR8Q
  • BPR8ES Spark plug can be used in place of BPR8ES-S
  • Cold-rolled threads
  • Trivalent plating
  • Specialized ground electrode designs

NGK plug codeR2525-10
Product TypeSpark Plugs
Electrode materialNickel (standard)
Weight0.1 lb
Manufacturer part #5281
UPC087295152812

Installing spark plugs

  1. Work on a cold engine. Blow debris out of the plug well before removing the old plug.
  2. Check the gap with a wire gauge against your service manual; adjust gently on the ground electrode only.
  3. Start the new plug by hand for a few turns so it can't cross-thread.
  4. Tighten to the torque in your manual (or the angle printed on the box).
  5. Refit the plug cap until it clicks, and route the wire as it was.
  6. Replace plugs as a set, one per cylinder.
More from NGKThe NGK lineup compared, sizing, parts by bike and FAQ