// frenos

Otras piezas de freno para moto

Kits de reconstrucción de pinzas, palancas y brazos de freno, sensores, interruptores, cables y protectores.

223 productos de 51 marcas.

Not every brake part fits under pads, rotors or lines, and these are often the parts that make a used motorcycle stop well again. This page lists caliper and brake rebuild kits, brake levers, arms and clevises, brake light switches and ABS sensors, drum brake cables, and rotor and caliper guards. Pick your bike to narrow the list to parts listed for it.

Comprar por tu moto — muestra solo los productos listados para ella.Elige tu moto

Otras piezas de freno223 productos

Comprar por marca

223 results

Cómo elegir

  • A caliper rebuild kit with new seals and pistons cures a sticking or leaking caliper, as long as the bores are clean.
  • Replace a brake light switch that stays on or never lights; it is a safety item and quick to swap.
  • Drum brake cables stretch with age, so adjust or replace a cable when the lever reaches the bar before the brake bites.
  • Disc and caliper guards protect off-road brakes from rocks and ruts; match the guard to your fork and caliper mount.

Preguntas frecuentes

Why is my motorcycle caliper sticking?

Most sticking calipers come from dirty or corroded pistons, swollen seals or dry slide pins, often after the bike has sat for a while. Cleaning the pistons and fitting a rebuild kit with new seals usually fixes it. A blocked master cylinder return port can cause the same drag.

How do I test a motorcycle brake light switch?

With the ignition on, pull the front lever and press the rear pedal one at a time while someone watches the brake light. A switch that only works with hard pressure, stays on, or does nothing needs adjusting or replacing. Check the bulb and fuse first, since they fail more often.

What does a motorcycle ABS sensor do?

An ABS sensor reads a toothed tone ring on the wheel or rotor and tells the ABS unit how fast each wheel is turning. If one wheel slows too quickly, the system eases brake pressure. A damaged sensor or a dirty tone ring usually lights the ABS warning lamp.