The full story
What it means for you
- This is a competition-only bike: plan on track days and races, not street riding.
- The 16.5-inch front rim takes 16.5-inch track tires only; standard 17-inch motorcycle tires will not fit, so stock up on the right slicks.
- Budget service by hours: oil every 15, piston and valve check at 45, full overhaul at 90. The gasketed covers make that work faster.
- Start with DTC on and step down through its four levels as you learn a track; set up the 2 Riding Modes in the X-Link app.
- Price is $12,995 at selected US dealers from Spring 2027; ask about the X-Link app and the Com-Link module, which are accessories.
The Desmo450 SM is Ducati's first competition-only supermoto: a race bike, not a street machine. Shown at World Ducati Week, it starts from the Desmo450 MX motocross bike and reworks the parts that matter on a supermoto track: suspension, triple clamps, wheels, brakes, final drive ratio, slipper clutch and electronics. The platform already has a win behind it: Team Undici and Marc Reiner Schmidt, a multiple-time world champion, took victory on its world debut.
Ducati says the bike is meant to work for both amateurs and experienced racers, with an engine, chassis and electronics package that lets you ride fast without wearing yourself out, which helps you stay consistent over a race. Ducati also says it is the only bike in its class with Desmodromic valve timing. It lands at selected US dealerships in Spring 2027 at $12,995, alongside two other new Desmo models for 2027: the Desmo450 EDS dual sport and the Desmo250 MX.

Engine, gearbox and clutch
Power comes from the 449.6 cc Desmo450 single, rated at 63.5 hp at 9,400 rpm and 39.5 ft-lb at 7,500 rpm. The Desmodromic valve train lets Ducati set the rev limiter at 11,900 rpm. On a supermoto track that wide spread means you can hold a gear longer between corners and shift less often.
Quick Shift handles upshifts, and the clutch is a Suter slipper unit calibrated for this bike. Its job is to help you control the rear stepping out as you back the bike into a corner on the brakes, the classic supermoto entry. A DID chain drives the rear wheel; the release mentions a revised final drive ratio but does not give the sprocket sizes.
Suspension
Showa set up the suspension directly, which Ducati says is a first on a production supermoto. The goal is a front end that holds up under hard braking, turns in precisely and stays controlled across the mix of pavement and dirt a supermoto course includes.
The fork is a sealed 49 mm upside-down cartridge unit, fully adjustable for compression and rebound, with its own springs and settings, Kashima coating and 280 mm of travel. The left leg carries a radial brake caliper mount, and the billet-machined triple clamps are spaced wider to clear the front wheel. At the rear, a fully adjustable Showa monoshock works through a progressive linkage with 295 mm of wheel travel, tuned for traction and balance.

Wheels, tires and brakes
The wheels are Takasago Excel aluminum rims with the Bartubeless system, which does away with inner tubes and, Ducati says, cuts rotating and unsprung mass by 2.6 lb for better handling and suspension response. The front rim is 16.5 inches and the rear 17 inches. That 16.5-inch front is a dedicated track-racing size: it takes 16.5-inch track tires only and will not accept standard 17-inch motorcycle tires.
Stock tires are Metzeler Racetec SM slicks, the same tires used in the World Championship. The hand guards and short front fender are redesigned for supermoto, and shorter fork guards make room for the 125/75 front slick.
For braking, the front gets a Brembo Stylema radial caliper on a 310 mm Galfer floating disc with an aluminum carrier, fed by a PR15x19 radial master cylinder. The rear uses a 240 mm Galfer disc and a Brembo floating caliper. Ducati tuned the system for strong stopping with fine control.
Chassis
The light aluminum twin-spar frame is the one from the motocross bike, designed with as few welds as possible for weight, stiffness and strength, and shaped to give the engine as straight an intake path as possible. It pairs with a cast aluminum swingarm. The release gives no weight, seat height or wheelbase.
Fuel capacity is listed as 9 US gal in the standard features. Check that figure with a dealer before you plan around it.

Electronics
Ducati brings its patented Ducati Traction Control (DTC) to the supermoto class. It is calibrated for supermoto, estimates real rear-wheel slip, and adjusts engine parameters to keep traction and stability when grip changes. You can choose from four levels or switch it off.
Launch Control and Engine Brake Control can also be set to different levels. All three can be linked to 2 Riding Modes, which you can tailor to your riding and to each track through the accessory X-Link app.
Maintenance
Service intervals follow the norm for this kind of race bike: oil every 15 hours, piston replacement and valve clearance checks at 45 hours, and a full engine overhaul at 90 hours. To speed up work on the covers, Ducati skips three-component sealing paste: the cylinder head uses metal gaskets and the alternator and clutch covers use rubber ones.
The SM also gets predictive maintenance, which tracks wear and load on engine components from how the bike is used. With the accessory Com-Link module you can plan routine service more precisely. The release does not price the module.

Price, color and availability
The Desmo450 SM comes in Ducati Red. It is due at selected US dealerships in Spring 2027 with a price of $12,995. The release gives no Canadian price or date.
























