2027 Kawasaki Ninja H2 CARBON ABS in Mirror Coated Spark Black, right side view, with its green trellis frame
Photo: Kawasaki

Kawasaki· Ninja H2 CARBON ABS· 2027

2027 Kawasaki Ninja H2 CARBON ABS: what changed, and what it means if you ride one

Released
Nov 3, 2026
Model year
2027
Release type
Update
Price
$39,400 (Ninja H2R ABS: $64,300), ordered only…

Official release: 2027 KAWASAKI NINJA H2® CARBON ABS AND NINJA H2®R ABS MOTORCYCLES (Kawasaki, Nov 3, 2026). Credited and linked; not a review.

What's new for 2027

  • Engine

    Compression up from 8.5:1 to 11.2:1, 46mm throttle valves, new cams and a revised supercharger impeller, aimed at 4,000–7,000 rpm pull.

  • Exhaust & gearing

    New lighter 4-into-1 exhaust with no pre-silencer; final drive shortened from 44/18 to 44/17.

  • Brakes

    The first Kawasaki with Brembo Hypure front calipers.

  • Electronics

    Integrated riding modes, five-mode traction control, cruise control, heated grips and an updated TFT with a head-up layout.

  • Price & availability

    $39,400 (Ninja H2R ABS: $64,300), ordered only between November 3 and November 13.

Key specs

Only figures printed in the official release.

Ninja H2 CARBON ABS
Engine998cc supercharged inline four
Compression ratio11.2:1 (was 8.5:1)
Throttle valves46mm (was 50mm)
Final drive44/17 (was 44/18)
Front calipersBrembo Hypure
Traction control5 modes, can be switched off
ColorMirror Coated Spark Black
MSRP$39,400
Ninja H2R ABS (closed course only)
Power321.5 HP (ISO 4106)
Front calipersBrembo Stylema monobloc
Rear shockÖhlins
ColorMirror Coated Spark Black
MSRP$64,300

By Cali Biker Club News · Published · 3 min read

Kawasaki's supercharged Ninja H2 CARBON ABS gets more compression, a lighter exhaust, shorter gearing, Brembo Hypure front calipers, cruise control and heated grips for 2027, and the track-only Ninja H2R ABS returns.

Kawasaki Motors Corp., U.S.A. has announced the 2027 Ninja H2 CARBON ABS, the street-legal version of its supercharged hypersport, along with the return of the closed-course Ninja H2R ABS. The headline for owners and shoppers is that the street bike was not just repainted: Kawasaki went into the engine, the exhaust, the gearing, the brakes and the electronics, and the stated goal is stronger acceleration in the middle of the rev range, roughly 4,000 to 7,000 rpm, where most road riding happens.

Both bikes come in Mirror Coated Spark Black. Kawasaki lists the Ninja H2 CARBON ABS at $39,400 and the Ninja H2R ABS at $64,300, and both were sold through a short order window that ran from November 3 to November 13, so if you missed that window, a Kawasaki dealer is the place to ask.

The engine: more compression, smaller throttle bodies

The 998cc supercharged inline four is reworked inside, with a long list of changes aimed at midrange response. Kawasaki says that from about 8,000 rpm the engine still builds into the full supercharged rush the H2 is known for; the work is about what happens below that.

  • Compression ratio goes from 8.5:1 to 11.2:1.
  • Throttle valves shrink from 50mm to 46mm, and the aluminum intake chamber drops from 1.5 to 1.3 gallons.
  • The supercharger impeller has a revised blade inlet angle (its overall size is unchanged), and an ECU-controlled blow-off valve is fitted.
  • New cam profiles shorten intake and exhaust duration and reduce valve overlap. Kawasaki also cites better fuel efficiency.
  • Dual piston oil jets become single jets, and oil capacity is reduced by 500 mL, which Kawasaki says saves about 0.6 lb.

That last point matters at service time: if you do your own oil changes on a 2027, use the capacity in the 2027 owner's manual, not a number remembered from an earlier H2.

A lighter exhaust and shorter gearing

The exhaust is a new 4-into-1 design. The header pipes start at 38.1mm at the cylinder head and widen to 42.7mm, the pre-silencer chamber is gone, and the silencer shrinks from 2.6 to 2.3 gallons and sits closer to the bike's center of mass. Kawasaki credits the new system with more torque between about 4,000 and 8,000 rpm.

Final drive gearing is shortened from 44/18 to 44/17, with revised clutch spring settings. Shorter final gearing generally trades a little top-gear cruising calm for quicker acceleration in each gear. If you change sprockets or chain on a 2027, start from the 44/17 stock combination, not the earlier 44/18.

Brakes and electronics

Kawasaki says the H2 CARBON ABS is the first Kawasaki to use Brembo Hypure front brake calipers. The dash is an updated full-color TFT paired with an analog tachometer, with two layouts: a three-section screen, and an aircraft-style head-up display that shows boost pressure, lean angle and pitch angle.

  • New integrated riding modes: Sport, Road and Rain, plus a customizable Rider mode, switchable on the move with the throttle closed.
  • Updated traction control with five modes (Mode 5 is the most cautious, meant for rain) that can also be switched off.
  • Updated launch control, which Kawasaki says is for closed-course use only.
  • New electronic cruise control on the left bar, which cancels when you use either brake, the clutch, shift, or roll the throttle fully closed.
  • New handlebar switches and new heated grips.

The bike also connects to the RIDEOLOGY THE APP MOTORCYCLE smartphone app for vehicle information, a riding log, call and message notifications, and presetting riding modes, traction control, quickshifter and engine-brake settings. Kawasaki notes that voice command and navigation are available only with a purchased license.

Paint and bodywork

The silver-mirror paint uses revised reflective particles, and Kawasaki's Highly Durable Paint can repair certain kinds of fine surface scratches on its own. The upper cowl is carbon-fiber reinforced plastic, similar to the H2R's.

The Ninja H2R ABS returns, for the track only

The H2R is a limited-production bike that Kawasaki says is suitable only for closed-course circuits. Its 998cc supercharged four is rated at 321.5 HP, and Kawasaki points out that this figure is measured to the ISO 4106 standard, which may read higher than SAE figures. It carries Brembo Stylema monobloc calipers and an Öhlins rear shock.

What this means for riders

If you already own an earlier Ninja H2, the 2027 changes are deep enough that parts and settings will not all carry over: gearing, exhaust, oil capacity and brakes are all different. Check part numbers against your exact model year before ordering. If you are shopping, the 2027 is the one aimed at stronger everyday pull, with cruise control and heated grips listed as new for 2027.

For the full details, read Kawasaki's official release (linked on this page). For the model's history, years and known issues, see the Ninja H2 Bike Dossier.

Written by Cali Biker Club News in our own words from the manufacturer's official release. Specs and prices are the manufacturer's; check the release for the full details.

More from Kawasaki

Kawasaki →

About Cali Biker Club News

Cali Biker Club News covers new models, recalls, rider technology and service news for riders researching the bike they own or may buy. We work from official manufacturer press materials, credit and link every source, and write in our own words.

Press contact

Editor
David Schmunk
Email
media@calibiker.club
For press & manufacturers →