By Cali Biker Club News · Published · 2 min read
KTM's 2027 SX-F Factory Editions are the first bikes of its next-generation motocross platform: a new frame and subframe, WP XACT closed-cartridge spring suspension, a redesigned 250 engine that revs to 14,500 rpm and more power for the 450. Dealers get them from December.
Every year KTM takes its 450 SX-F and 250 SX-F motocrossers and builds a Factory Edition with race-team parts and graphics. For 2027 the Factory Editions do more than that: KTM says they are the first models of its next generation of SX-F bikes, with changes to the frame, engine, suspension, ergonomics, exhaust and graphics. KTM credits feedback from its MXGP and AMA SuperMotocross teams for shaping them, and says the same technical base will spread to the rest of its upcoming SX range.
Chassis and suspension
Both frames are reworked for lower weight, new geometry and stiffness, a redesigned steering head and new engine mounts. KTM says the aluminum subframe is the lightest it has built, the wheelbase can be lengthened further, and the CNC-machined triple clamp is a new design. Suspension is WP XACT closed-cartridge spring fork and shock.
The rider area changes too: a slimmer profile, more leg contact area, a new seat and new footpeg surfaces, all meant to make it easier to move around on the bike.
Engines
- 250 SX-F Factory Edition: a redesigned engine with an oval throttle body, oval intake ports, a top-feed injector and a completely new valve train. Compression rises to 15.5:1 and the rev limit to 14,500 rpm, which KTM says matches what its MXGP riders use. The engine also sits 2.3 mm higher in the frame.
- 450 SX-F Factory Edition: more power, peaking at 10,000 rpm, with KTM pointing to the ECU and fuel control for keeping it manageable.
- Both: a lighter, stronger gearbox with smoother shifts, a new ECU that processes sensor data faster for ignition, fueling, gear-dependent maps and quickshifter function, a new exhaust, a redesigned airbox and an improved cooling system.
Race parts and servicing
The parts list reads like a race truck: Brembo brakes with a new rear pad, NEKEN handlebars that are lighter and offer two mounting positions, WP PRO COMPONENTS triple clamps and start device, EXCEL rims with a new spoke layout, ODI lock-on grips and a Selle Dalla Valle seat cover. KTM also says maintenance guidelines are marked on the bike itself, and the hour meter is new and easier to reach.
What it means for you
If you race or ride a lot of hours, the Factory Editions are a preview of where the whole SX-F line is heading. Because the frame, subframe, engine mounts, seat and ergonomics all change, assume most chassis parts from a 2026 or older SX-F will not fit until a part number says they do. The same goes for the 250's top end and intake.
Service matters more on a high-revving 250. Use the 2027 manual's intervals and torque values, log hours on the new hour meter, and keep the air filter clean. KTM says the 2027 Factory Editions reach authorized dealers from December; ask your dealer for the price, which the release does not give.
For earlier years, see our 450 SX-F Bike Dossier and 250 SX-F Bike Dossier.
Written by Cali Biker Club News in our own words from the manufacturer's official release. Specs and prices are the manufacturer's; check the release for the full details.





