Dante Oliveira in the air on his KTM 450 XC-F against a clear blue sky at the Taft NGPC round
Dante Oliveira jumping his KTM 450 XC-F up a dusty desert hill at Taft, seen from behind
Dante Oliveira, his family and the FMF KTM team behind a 2026 National Grand Prix Pro Champion banner
Brandy Richards riding her KTM 350 XC-F Factory Edition along a leaf-covered woods trail at the Ironman GNCC
Trystan Hart lifting the front of his KTM over an obstacle under the arena lights at the Everett EnduroCross
1 / 5

RacingKTM· KTM 450 XC-F

Dante Oliveira wins at Taft to clinch a seventh straight NGPC title

Released
Oct 26, 2026
Release type
Racing

Official release: DANTE OLIVEIRA CLINCHES SEVENTH-CONSECUTIVE NGPC TITLE WITH FMF KTM FACTORY RACING (KTM, Oct 26, 2026). Credited and linked; not a review.

What's new

  • Title

    Dante Oliveira: seventh consecutive NGPC Pro Class title, clinched with one round left.

  • Taft

    Led from Lap 1 to the finish on a KTM 450 XC-F; total time 1:30:40.

  • GNCC Round 12

    Brandy Richards won WXC at Ironman to lead the series alone; Jason Tino second in XC2 250 Pro.

  • EnduroCross Round 3

    Trystan Hart swept all three EX Pro races in Everett; second in the standings on 65 points.

Key specs

Only figures printed in the official release.

Results (from the release)
NGPC Round 9, Taft, Pro1. Dante Oliveira (KTM), 2. Mason Semmens (KTM), 3. Colton Aeck (Honda), 4. Mateo Oliveira (Husqvarna)
GNCC Round 12, Ironman, XC1 Open Pro1. Kailub Russell (Yamaha), 2. Liam Draper (Yamaha), 3. Mike Witkowski (Honda), 4. Craig DeLong (Husqvarna), 8. Grant Davis (KTM), 12. Ben Kelley (KTM)
GNCC Round 12, XC2 250 Pro1. Jhak Walker (Beta), 2. Jason Tino (KTM), 3. Toby Cleveland (Husqvarna)
GNCC Round 12, WXC1. Brandy Richards (KTM), 2. Danielle McDonald (Yamaha), 3. Korie Steede (Husqvarna)
EnduroCross Round 3, Everett, EX Pro1. Trystan Hart (KTM), 2. Jonny Walker (Triumph), 3. Ryder LeBlond (Husqvarna)

By Cali Biker Club News · Published · 2 min read

Dante Oliveira led every lap at Taft on his KTM 450 XC-F to clinch his seventh consecutive National Grand Prix Championship with a round to go. The same KTM release covers Brandy Richards's Ironman GNCC win and Trystan Hart's clean sweep at the Everett EnduroCross.

FMF KTM Factory Racing's Dante Oliveira came to Round 9 of the 2026 National Grand Prix Championship (NGPC) as the defending champion, with a chance to close out the title early. He took it. Oliveira grabbed the lead on the first lap at the high-speed Taft venue and held it for the remaining eight, winning in a total time of 1:30:40 on his KTM 450 XC-F.

Added to six other wins earlier in the season, that gave him a seventh NGPC Pro Class title in a row, with one round still to run. The finale, the Desert MC Moto Oasis Grand Prix, was scheduled for November 13-15 in Mesquite, Nevada.

A hard day at Taft

Oliveira did not make it sound easy. He described a course that had to be ridden flat out and was full of square-edged holes, and admitted that by halfway he just wanted to see the checkered flag. He was “pretty smoked” at the finish, in his words, and thanked the FMF KTM Factory Racing team for making the title possible.

Mason Semmens, also on a KTM, finished second. Colton Aeck (Honda) was third and Mateo Oliveira (Husqvarna) fourth.

Ironman GNCC: Richards takes the points lead

The release also covers Round 12 of the Grand National Cross Country Series (GNCC) at Ironman Raceway in Crawfordsville, Indiana, raced in dry, dusty conditions. Brandy Richards arrived tied for the WXC points lead and left with it to herself, winning on her KTM 350 XC-F FACTORY EDITION after a sprint on the final lap. Danielle McDonald (Yamaha) was second and Korie Steede (Husqvarna) third.

In XC2 250 Pro, 22-year-old Jason Tino entered the woods in third on his KTM 250 XC-F and finished second behind Jhak Walker (Beta), keeping his title hopes alive. He said the dust made visibility terrible all day.

In XC1 Open Pro, Round 10 winner Grant Davis ran near the front for most of the race on his KTM 450 XC-F until a problem late on dropped him to eighth. Reigning GNCC champion Ben Kelley crashed in the first corner and fell again soon after, and was credited 12th on his KTM 350 XC-F FACTORY EDITION. Kailub Russell (Yamaha) won the class. The Buckwheat 100 on November 7-8 was the 13th and final round.

EnduroCross: Hart sweeps Everett

Indoors, Trystan Hart won all three EX Pro races at Round 3 of the AMA EnduroCross Championship at Everett's Angel of the Winds Arena in Washington, riding a KTM 350 XC-F. KTM says it was only the second clean sweep of his EnduroCross career, and his second overall win in a row after Nampa.

The maximum score moved him from third to second in the standings on 65 points, four behind leader Jonny Walker, with three of the six rounds left. Round 4 was set for Salt Lake City, Utah, on November 7.

What it means for you

  • If you ride the desert: Oliveira's title bike is the KTM 450 XC-F, the same cross-country model Grant Davis races in the woods. KTM's current version is in our story on the 2027 XC range.
  • If you follow the GNCC: going into the Buckwheat 100, Richards led WXC and Tino was still in the XC2 250 Pro fight. Our story on Brandy Richards's WXC title covers the finale.
  • If you follow EnduroCross: the sweep turned third in the standings into second. Our story on Trystan Hart's 2026 EnduroCross title covers the rest of his season and Oliveira's last NGPC race of the year at Mesquite.
  • Riding in dust: Tino and Davis both talked about dust, not mud, at Ironman. If you race in it, leave a bigger gap to the rider ahead, and work on your starts, because clean air at the front is worth a lot.

Written by Cali Biker Club News in our own words from the manufacturer's official release. Specs and prices are the manufacturer's; check the release for the full details.

More from KTM

KTM →

About Cali Biker Club News

Cali Biker Club News covers new models, recalls, rider technology and service news for riders researching the bike they own or may buy. We work from official manufacturer press materials, credit and link every source, and write in our own words.

Press contact

Editor
ReV
Email
media@calibiker.club
For press & manufacturers →