By Cali Biker Club News · Published · 2 min read
Triumph's enduro pair gets the latest KYB suspension with tool-free adjusters, a calibration update, clutch and gearchange revisions and all-black bodywork for 2027. UK prices start at £8,995 for the TF 250-E and £9,595 for the TF 450-E.
Triumph's TF 250-E and TF 450-E enduro bikes are only a few seasons old, and for 2027 Triumph is refining them rather than starting over. The release lists suspension, clutch, gearchange and engine updates, most of them traced back to what its factory and supported riders ran into on the EnduroGP and EnduroCross circuits. The bikes were developed with World Enduro Champions Paul Edmondson and Iván Cervantes.
Both bikes are available to order now in the UK. The release gives UK prices only, so US riders should ask a Triumph off-road dealer for local pricing and timing.
Suspension you can adjust without tools
The headline change is the latest KYB suspension on both bikes, with revised spring and valving settings and new tool-free adjusters. The fork is a 48 mm KYB AOS coil-sprung unit with 300 mm of travel and adjustable compression and rebound; the rear is an adjustable piggyback shock. New fork guards add protection.
Tool-free clickers matter more than they sound. On an enduro day the trail changes every few miles, and being able to add a couple of clicks of compression at a check without digging out a screwdriver means you are more likely to actually do it. The TF 250-E also gets new forged 7075-T6 Neken triple clamps, tuned to sharpen the front end.
Clutch, gearchange and engine
Both bikes get a calibration update. The TF 250-E adds a new clutch pack and bearing, a new steel selector star, a revised gear pedal lever and a new valve guide design. The TF 450-E gets a new clutch pack, bearing and hose, a new selector star, detent arm, gear selector shaft and gear pedal lever, plus DLC-coated rocker shafts and new valve guides for durability.
Electronics carry over and are generous for the class: traction control, launch control, a quickshifter and two engine maps come standard through an Athena ECU, with more maps available through an optional Wi-Fi tuning module. Brembo brakes with Galfer discs, ProTaper ACF Carbon Core bars, D.I.D DirtStar rims, Michelin enduro tires and full LED lighting are standard. Both use six-speed gearboxes and an 8.3 L fuel tank.
Results behind the changes
Triumph says its riders scored 15 victories and 62 podium finishes across factory and supported teams in the 2026 EnduroGP World Championship. Morgan Lesiardo was Enduro1 vice-champion and Leo Joyon was second overall in the Junior and Junior1 classes on the TF 250-E. On the TF 450-E, Jonny Walker won Triumph's first AMA EnduroCross title in 2025 and was second in the 2026 SuperEnduro World Championship.
What it means for you
- Choosing a size: the TF 250-E is the lighter, high-revving bike (42.3PS, 114.2 kg wet in the spec table); the TF 450-E has more power (59.2 PS, 116.7 kg) for faster, open terrain.
- Seat height: the spec table lists 957 mm, while the text says 955 mm. Either way it is tall, so sit on one at a dealer before you buy.
- Setup: with tool-free adjusters there is no excuse not to tune. Note your baseline clicks, then change one setting at a time.
- Price: £8,995 (TF 250-E) and £9,595 (TF 450-E) are UK prices. Ask your dealer for US pricing.
Our TF 250-E and TF 450-E news pages collect Triumph's releases for each bike.
Written by Cali Biker Club News in our own words from the manufacturer's official release. Specs and prices are the manufacturer's; check the release for the full details.








