// brakes

Motorcycle Brake Master Cylinders

Master cylinders and rebuild kits, reservoirs, covers and caps.

107 products from 32 brands.

The master cylinder turns lever or pedal travel into hydraulic pressure, so a worn seal or a sticky piston shows up as a soft or sinking brake. This page lists complete front and rear master cylinders for motorcycles, rebuild kits with new pistons and seals, and the reservoirs, covers, caps and gaskets that keep the fluid sealed. Match the bore size and mount to your model first.

Shop by your bike — show only the products listed for it.Pick your bike

Shop by brand

102 results

How to choose

  • A rebuild kit restores a master cylinder whose bore is clean and smooth; a pitted or scored bore needs a complete unit.
  • Bore size sets lever feel and pressure, so replace like for like unless you are also changing calipers.
  • Front units mount on the handlebar with the lever and rear units on the frame or footpeg bracket; check which one the listing covers.
  • Reservoir gaskets harden and let moisture in, so replace a cracked or swollen gasket when you flush the fluid.

Common questions

How do I know if my motorcycle master cylinder is bad?

Common signs are a lever or pedal that sinks slowly while you hold it, fluid seeping around the piston boot, or a brake that stays soft after a full bleed. A brake that drags can also mean the return port is blocked. A rebuild kit or a new unit fixes either problem.

Can you rebuild a motorcycle master cylinder?

Yes, as long as the bore is clean. A rebuild kit replaces the piston, cups, seals, spring and circlip, and often the dust boot. Clean the bore, check it for pitting or scoring, then fit the new parts with fresh brake fluid. If the bore is pitted, replace the whole master cylinder instead.

What size master cylinder do I need for my motorcycle?

Start with the bore size of your stock unit, which is often cast or stamped on the body, such as 14 mm or 5/8 inch. A smaller bore gives more pressure with a longer lever stroke, and a larger bore does the opposite. Pick your bike to see the units listed for it.