// motorcycle inner tubes

Motorcycle Inner Tubes

A tube fits by rim diameter. Enter your tire size and any width in that rim size works.

56 tube families across 15 brands.

An inner tube is sized by rim diameter, so a tube for a 21 inch front wheel covers a range of tire widths on that rim. Enter your tire size, then match the valve stem your rim takes and choose standard, heavy or ultra heavy duty for how hard your motorcycle or dirt bike gets ridden.

Showing all tube families.
Common rims:

Top brands

TUBE BRANDS

How to choose

  • Read your tire size off the sidewall; the last number, such as 19 in 110/90-19, is the rim diameter the tube must match.
  • Match the valve stem to your rim's valve hole, including straight or 90° stems and center or side placement, using the valve filter.
  • Choose heavy duty tubes for off-road riding, where thicker rubber resists pinch flats at lower pressures, and standard duty for most street use.
  • Fit a new tube whenever you fit a new tire, and check that the rim strip still covers every spoke nipple.
  • Many trail riders carry a 21 inch front tube, which can also serve as a temporary rear tube in an emergency.

Common questions

What size motorcycle inner tube do I need?

Match the tube to your tire size, which is molded on the sidewall. Rim diameter must match exactly, while width can vary within the range the tube lists, so one tube often covers several tire widths. Then match the valve stem type and angle to your rim's valve hole.

Do motorcycle tires need inner tubes?

Tube-type tires, marked TT or Tube Type on the sidewall, need one, and so do most traditional spoked wheels, because air escapes through the spoke holes. Tubeless tires on cast wheels run without one. Many dirt bikes, vintage bikes and spoked-wheel cruisers use tubes.

Can you patch a motorcycle inner tube?

Yes. A small puncture can be patched with a rubber patch kit and vulcanizing cement, a common trail fix. Many riders still fit a new tube at the next tire change. A tear near the valve stem, a long pinch-flat split or a tube that has been patched several times should be replaced.