La historia completa
What it means for you
- If you were going to add an exhaust, triple clamps, a holeshot device and guards to a standard MX anyway, the Factory bundles them at $13,995, with only 400 US units.
- The Wi-Fi module is standard, so download the X-Link app and set up both Riding Modes and your DTC level before race day.
- Plan engine work by the hour meter: piston and valve check every 45 hours, full overhaul at 90.
- Ducati Performance sells the rest of the MXGP replica parts list (rims, billet hubs, racing seat, Brembo Racing calipers), but not the team Showa suspension.
- Confirm fuel capacity with a dealer, since the printed gallon and liter figures do not match.
A year after the first Desmo450 MX, Ducati has added a Factory version for riders who want to show up at the gate with a bike that is already set up to race. Ducati says it is lighter and stronger than the standard MX, while staying friendly enough for amateurs as well as pros. Ducati unveiled it in Anaheim at the AMA Supercross opener, the round at which its Troy Lee Designs Red Bull Ducati Factory Racing team gave the Desmo450 MX its US indoor championship debut.
The Factory package: a full titanium Akrapovič exhaust with its own engine mapping, Showa suspension with Dark Kashima coating and titanium oxide (TiO) superfinishing, billet triple clamps, a holeshot device, a skid plate and front disc guard, an RK MXU O-ring chain, a Wi-Fi module as standard and a Ducati Corse livery. US bikes are limited to 400 units, each with a numbered engine cover and a custom Factory bike stand, priced at $13,995.

Engine and Akrapovič exhaust
The 449.6 cc single uses Desmodromic valve timing, the system found on every Ducati race bike including the MotoGP Desmosedici. It lets the engine rev very high: the limiter sits at 11,900 rpm, which Ducati calls a new benchmark for the class. More over-rev means fewer shifts per lap, and Ducati argues it helps you get off the gate and win the holeshot.
Peak output is 63.5 hp at 9,400 rpm and 39.5 ft-lb at 7,500 rpm, and 70% of maximum torque is already there at 4,200 rpm. Ducati says that strong low-rev pull makes the bike less tiring to ride than a typical 450, and that the valve system needs less energy to open the valves, allowing aggressive lift profiles with large valves.
The Factory's titanium Akrapovič full system comes with dedicated engine calibration. Compared with the standard MX, Ducati says it gives fuller torque from 4,000 to 7,500 rpm and more power as you accelerate, and it saves 3.7 lb on its own.
Chassis and weight
The frame is the same aluminum twin-spar perimeter design as the standard MX, laid out so the intake and exhaust run as straight as possible. Ducati quotes the frame at 19.75 lb, built with fewer welds for lightness, reliability and rigidity. Its compact shape is meant to help ergonomics and to make jobs like pulling the shock quick at the track. The centrally mounted shock works on a cast aluminum swingarm through a linkage with forged aluminum links.
Ready to ride without fuel, the Factory weighs 229 lb. Ducati says it ends up 1.7 lb lighter than the standard MX even though it carries extra parts such as the skid plate and disc guard.
The fuel tank is printed as 9 US gal (7.2 l) in the feature list. Those two figures do not agree with each other, so confirm the capacity with a dealer.

Showa suspension
Ducati and Showa developed the Factory suspension for race use. A titanium oxide treatment with superfinishing raises surface hardness on the fork legs and shock rod by 60%, so roost and gravel are less likely to wear or chip them. Dark Kashima coating on the fork sliders and the shock body cuts friction, which helps the suspension follow small bumps and gives you more confidence.
The fork is a fully adjustable 49 mm upside-down closed-cartridge unit with 310 mm of travel. The shock is fully adjustable for high- and low-speed damping, uses a 50 mm piston and gives 301 mm of wheel travel. Ducati notes that the official MXGP team suspension from Showa is not sold to private riders.
Brakes, wheels and tires
Brembo supplies the brakes, a floating two-piston caliper up front and a single-piston caliper at the rear, on single Galfer discs of 260 mm and 240 mm. Wheels are Takasago Excel aluminum rims with Alpina spokes in 21-inch front and 19-inch rear sizes, on Pirelli Scorpion MX32 Mid-Soft tires.

Electronics
Ducati Traction Control (DTC) uses Ducati's MotoGP and Superbike experience. Ducati says it differs from other systems in the segment because it sets its power cut from how much the rear wheel is actually slipping, so it reacts quickly and smoothly. It recognizes moments when it should stay out of the way, such as jumps, and disengages by itself. If there is a spot on the track where you want full power, a light pull on the clutch lever switches it off, and it re-engages a few moments later. There are four levels.
Launch Control and Engine Brake Control also have adjustable levels, and all three can be linked to 2 Riding Modes alongside 2 Power Modes. On the Factory the Wi-Fi module comes standard, so you can tune engine response, launch control, engine braking and DTC through the X-Link app for each track. The gearbox has a quickshifter.
Race parts and protection
The billet aluminum Factory triple clamps are anodized black and save nearly 0.5 lb, and the front axle bracket is black anodized to match the works bikes. A holeshot device holds the fork compressed for the start, keeping the front down and the bike stable as it leaves the gate.
A skid plate and a front brake disc guard keep mud and stones off the engine and disc. The final drive is the RK MXU Gold O-ring chain that Ducati says the factory bikes use, chosen for durability and reliability.

Limited edition: stand, numbered cover and livery
This model year is a limited run of 400 units for the US. Each bike gets an engine cover marked with its own production number and a personalized Factory bike stand; the feature list marks those two items as only available in the United States and Canada. The paint is a special Ducati Corse livery, listed as the Ducati Corse 2025 Livery, modeled on the official MXGP World Championship bikes.
Maintenance intervals
Ducati set the service schedule to keep running costs down: piston replacement and a valve clearance check every 45 hours, and a full engine overhaul at 90 hours. Ducati calls these benchmark values for the class.

Accessories and apparel
Ducati Performance sells parts to build a replica of the MXGP Desmo450 MX, with everything from the race bike available except the official Showa suspension. The list includes high-performance rims with reinforced spokes and billet hubs, a racing seat and Brembo Racing calipers. For riders, a Drudi Performance collection offers Alpinestars jersey, pants, gloves and boots, plus an Arai helmet, a Spidi rain jacket, a wind vest and a softshell. No accessory prices are given.
Price and availability
The Desmo450 MX Factory is due in North America in January 2026 at $13,995 in the United States, with other markets later. The release gives no Canadian price.



























