DucatiUpdatedNew bikesDucati· Desmo450 MX· 2026
2026 Ducati Desmo450 MX Factory: Akrapovič titanium exhaust, treated Showa suspension, 229 lb and 400 US units
The 2026 Desmo450 MX Factory is a race-ready version of Ducati's motocrosser with a titanium Akrapovič system, Showa suspension with Dark Kashima and TiO treatments, billet triple clamps and a standard Wi-Fi module. It is limited to 400 US units at $13,995.
Released · By Cali Biker Club News· Our take: · Updated · 5 min read
The manufacturer's own words, credited and linked. This tab is kept out of search; our take is the page to share.
Ducati Desmo450 MX Factory: the race-ready motocross bike
Ducati ·
In short
Our summary, in our own words.
Ducati's Desmo450 MX Factory is a race-ready version of the Desmo450 MX with a titanium Akrapovič exhaust, Showa suspension with Dark Kashima and TiO treatments, billet triple clamps, a holeshot device and a standard Wi-Fi module. It weighs 229 lb without fuel and is limited to 400 US units at $13,995 from January 2026.
Read our take →Ducati Desmo450 MX Factory: the race-ready motocross bike
2026-01-09
A Desmo450 MX designed for those who want a bike with everything they need to line up at the start of the most demanding competitions
The Factory is lighter (229 lb) and equipped with even more racing-oriented componentry: Showa suspension with Dark Kashima, TiO and superfinishing treatments, Akrapovič full exhaust and billet triple clamps
The 2026 Ducati Desmo450 MX Factory will be limited to 400 units available in the US starting January 2026
Sunnyvale, Calif., January 9, 2026 – One year after the introduction of the first Desmo450 MX, Ducati presents the Factory version. A bike designed for riders looking for a race-ready bike, already equipped with everything needed to compete. A version of the Desmo450 MX which, thanks to its high-level racing components, is even lighter and more powerful than the standard version, while retaining the ability to amplify the riding skills of the rider, whether professional or amateur, and to offer high performance with reduced physical effort. The presentation took place during the first round of the AMA Supercross in Anaheim, where the Troy Lee Designs Red Bull Ducati Factory Racing team debuted the Desmo450 MX in the US indoor championship.
The Desmo450 MX Factory is equipped with a complete Akrapovič titanium exhaust system with dedicated engine mapping, which reduces weight (-3.7 lb), improves power delivery, and offers a fuller and more sustained torque curve. The Showa suspension, with a Dark Kashima coating on the fork legs and shock absorber body, and TiO superfinishing on the stems and rod, offers improved smoothness and wear and chipping resistance.
The billet Factory triple clamps further reduce weight by almost .5 lb. The skid plate and front disc guard protect against mud and stones, and the O-ring RK MXU chain, the same used on factory bikes, offers improved durability and reliability. The use of premium components makes the bike 1.7 lb lighter than the standard version, despite the extra parts.
The holeshot device, which keeps the fork compressed at the start, improves stability and acceleration as the bike launches off the gate. The WiFi module allows the rider to customize Riding Modes using the XLink app, adjusting engine response, launch control, engine braking, and Ducati Traction Control settings.
For the U.S. market, each Desmo450 MX Factory will be delivered with a custom, personalized Factory bike stand and a numbered engine cover individually marked with its production number, as this model year will be a limited run of 400 units.
Finally, the Ducati Desmo450 MX Factory is even more beautiful and evocative thanks to the special Ducati Corse livery, which recalls that of the official MXGP World Championship bikes.
Single-cylinder engine with Desmodromic valve timing
The Desmo450 MX Factory engine features Desmodromic valve timing, the system used on all Ducati racing bikes, including the MotoGP Desmosedici. This feature offers several advantages to the Desmo450, first and foremost the ability to run the engine at very high revs, which increases over-rev capability and reduces the number of gear changes required over the course of a lap. Moreover, it increases the chances of getting off the line faster than rivals at the gate and winning the holeshot, the coveted prize awarded to the first rider to exit the first corner.
The Desmo450 MX Factory also offers a sustained torque curve at low revs, ensuring strong acceleration out of corners, with linear power delivery and acceleration unmatched in this category. This unique power delivery curve, which delivers 70% of maximum torque at just 4,200 rpm, makes the Desmo450 MX less demanding and tiring than a traditional 450, benefiting track performance and riding enjoyment. This is enabled by the Desmodromic distribution system, which reduces the energy required to open the valves, allowing for more aggressive lift curves even with larger valve diameters.
The maximum power of the Desmo450 engine is 63.5 hp at 9,400 rpm, and the maximum torque delivered is 39.5 ft-lb at 7,500 rpm. The limiter intervention is set at 11,900 rpm, a new benchmark for the category. Compared to the standard version, the addition of the Akrapovič titanium exhaust, with dedicated engine calibration, delivers a more sustained torque curve between 4,000 and 7,500 rpm and greater power during acceleration.
Chassis
The Desmo450 MX Factory frame is built on the same aluminum perimeter as the MX version. This configuration was chosen to create a lightweight structure that would allow the engine to have the straightest possible intake and exhaust ducts, thereby maximizing performance. The engineers at Borgo Panigale have succeeded in designing a frame weighing 19.75 lb, reducing the number of welds and achieving the objectives of lightness, reliability and rigidity. The frame plays a key role in containing the bike's weight, which, thanks to the high-quality components that characterize the Desmo450 MX Factory, is 229 lb ready to use, excluding fuel.
The extremely compact frame design has also been studied to ensure the best ergonomics for the rider and, at the same time, quick and easy maintenance in the workshop or at the track, where operations such as shock absorber removal can be carried out quickly. The shock absorber is mounted in a central position and works on a cast aluminum swingarm and a lever with forged aluminum links.
The Desmo450 Factory suspension was developed with Showa to improve performance and reliability for racing use. The surface hardness of the fork legs and shock absorber rod is increased by 60% through titanium oxide treatment and superfinishing, improving resistance to gravel-related wear and chipping. The Dark Kashima treatment on the fork sliders and shock absorber body increases smoothness, improving the ability to copy bumps and therefore increasing rider confidence. The fork is fully adjustable, with 49 mm upside-down stanchions and 310 mm of travel. The shock absorber is fully adjustable, with 301 mm of wheel travel.
The billet triple clamps, made of aluminum and anodized black, save nearly 0.5 lb in weight. Finally, to bring the Desmo450 Factory's look closer to the official bike's, the front axle bracket is also anodized black.
As for the braking system, Ducati has chosen its long-standing partner Brembo. At the front, there is a floating two-piston caliper, while at the rear, there is a single-piston caliper. The Galfer brake discs are 260 mm at the front and 240 mm at the rear.
Electronics
The experience in MotoGP and Superbike, where Ducati is a technological benchmark, has allowed the engineers at Borgo Panigale to introduce a genuine traction control system on the Desmo450 MX, offering benefits in terms of lap times, rider safety and energy savings when riding. Unlike the systems currently available in the segment, the Ducati Traction Control (DTC) implemented on the Desmo450 MX calibrates power cut-off according to the actual slippage of the rear wheel, thus ensuring effectiveness, responsiveness, and linearity of intervention. This system can identify when it should not engage, such as during jumps, and automatically disengages. Furthermore, if the rider identifies points on the track where he wants to be able to take advantage of the full performance of the engine, he can deactivate the system with slight pressure on the clutch lever. The control will automatically re-engage in a few moments. Ducati Traction Control offers four different levels of intervention.
The electronic equipment also includes Launch Control and Engine Brake Control, which, like DTC, can be configured at different levels of intervention and associated with two Riding Modes that the rider can adapt to their needs and the characteristics of the track through the X-Link App, thanks to the WiFi module fitted as standard on the Factory. The gearbox is equipped with a Quickshifter.
Maintenance Intervals
The maintenance intervals have been strategically designed to reduce customer costs. Piston replacement is set at 45 hours, together with the valve clearance check, while the total engine overhaul is set at 90 hours, benchmark values for the segment.
Accessory
Ducati Performance offers a wide range of accessories to create a replica of the Ducati Desmo450 MX competing in the MXGP World Championship. All details of the 450 MX parts are available to enthusiasts, with the sole exception of the official Showa suspension, which private riders cannot purchase. The special parts on offer include high-performance rims with reinforced spokes and hubs machined from solid blocks, a racing seat and Brembo Racing brake calipers.
Finally, to complete the Factory look, the Ducati Performance catalog offers a complete technical collection developed in collaboration with Drudi Performance. The selection includes a full Alpinestars set consisting of a jersey, pants, gloves, and boots, along with an Arai helmet, wind vest, softshell, and Spidi rain jacket.
Availability
The Desmo450 MX Factory is scheduled to arrive in North America in January of 2026 and is priced at $13,995 in the United States, with subsequent releases around the world.
Desmo450 MX Factory
Color
Ducati Corse 2025 Livery
Main Standard Features
Desmo450 single-cylinder engine, 449.6 cc
Maximum power of 63.5 hp at 9,400 rpm, Maximum torque of 39.5 ft-lb at 7,500 rpm
Titanium Akrapovič full exhaust
Twin-spar Aluminum frame
9 US gal (7.2 l) fuel tank
Showa 49 mm upside-down closed cartridge forks, fully adjustable, 310 mm travel and Dark Kashima Coating on the outer tube; TiO treatment with superfinishing on fork legs
Showa fully adjustable (hi/low speed) monoshock, 301 mm wheel travel, with 50 mm piston. Dark Kashima Coating on shock body, TiO treatment with superfinishing on shock rod
Billet Factory triple clamp
Holeshot device
Custom Factory bike stand*
Numbered engine cover, limited to 400 units*
Cast aluminum swingarm
Wet weight without fuel 2 lb
Brembo braking system with single Galfer discs, 260 mm (front) and 240 mm (rear)
Front brake disc protection
Skid plate
Pirelli Scorpion MX32 Mid-Soft tires, 80/100-21” and 110/90-19”
RK MXU Gold w/o-ring chain final transmission
Takasago Excel aluminum rims with Alpina spokes, 21” x 1.60” and 19” x 2.15”
2 Power Modes, 2 Riding Modes
Wi-Fi Module
Riding Modes configurable via the accessory X-Link app
New generation electronics package with Ducati Traction Control (DTC), Power Launch, Quick Shift, and Engine Brake Control
Piston replacement every 45 hours
Valve clearance check every 45 hours
*Only available in the United States and Canada
Models in this release
- Desmo450 MX Factory
- All Desmo450 MX news →
Key specs
Only figures printed in the official release.
| Engine | Desmo450 single-cylinder, 449.6 cc |
|---|---|
| Maximum power | 63.5 hp at 9,400 rpm |
| Maximum torque | 39.5 ft-lb at 7,500 rpm |
| Rev limiter | 11,900 rpm |
| Exhaust | Titanium Akrapovič full exhaust |
| Frame | Twin-spar Aluminum frame, 19.75 lb |
| Weight ready to use, excluding fuel | 229 lb |
| Fork | Showa 49 mm upside-down closed cartridge, fully adjustable, 310 mm travel |
| Shock | Showa fully adjustable (hi/low speed), 301 mm wheel travel, 50 mm piston |
| Brakes | Brembo, single Galfer discs, 260 mm front, 240 mm rear |
| Tires | Pirelli Scorpion MX32 Mid-Soft, 80/100-21” and 110/90-19” |
| Chain | RK MXU Gold w/o-ring |
| Fuel tank | 9 US gal (7.2 l) (as printed) |
| Price | 13,995 USD |
| Production | 400 US units |
Source terms
Ducati Media House: “Media access approved 2026-11-20; Ducati Media House releases and photos for editorial use, credit Ducati.”
Ducati Media House (login). Approved 2026-11-20 (David).
All 25 photos
Official press photos, credited to Ducati. Swipe or use the arrows.
More on the Desmo450 MX
All Desmo450 MX news →Related stories
New bikes →About Cali Biker Club News
Cali Biker Club News covers new models, recalls, rider technology and service news for riders researching the bike they own or may buy. We work from official manufacturer press materials, credit and link every source, and write in our own words.
Our stories are written with AI assistance and checked against the official manufacturer release before they are published.
Press contact
- media@calibiker.club































