2027 Kawasaki RIDGE CREW Platinum Sport HVAC in Metallic Matte Twilight Blue with full cab, front brush guard and winch
2027 Kawasaki RIDGE CREW Lifted Edition in black and red with mud tires, red A-arms, raised snorkel intakes and a front winch
2027 Kawasaki RIDGE CREW Platinum Sport HVAC with its flip-up glass windshield raised to the fully open position
1 / 3

New bikesKawasaki· RIDGE· 2027

2027 Kawasaki RIDGE: a Platinum Sport HVAC crew cab and two Lifted Editions for the mud

Released
Aug 4, 2026
Model year
2027
Release type
New model

Official release: 2027 KAWASAKI RIDGE® AND RIDGE CREW® SIDE X SIDES INCLUDING THE NEW PLATINUM SPORT AND LIFTED EDITIONS (Kawasaki, Aug 4, 2026). Credited and linked; not a review.

What's new for 2027

  • Engine

    999cc in-line four, 116 hp (ISO 4106) and 73.8 lb-ft; ST HVAC models 92 hp.

  • Work

    1,000-lb tilting bed and 2,500-lb towing on every RIDGE.

  • Platinum Sport HVAC

    KYB piggyback shocks, arched A-arms, rear stabilizer, cameras, Garmin Tread 2, $39,999.

  • Lifted Edition

    ITP Cryptid mud tires, snorkels, no front sway bar, winch; $25,999 and $28,799.

  • Availability

    Late summer / early fall 2026.

Key specs

Only figures printed in the official release.

2027 Kawasaki RIDGE (from the release)
Engine999cc liquid-cooled in-line 4-cylinder, CVT
Output116 hp (ISO 4106), 73.8 lb-ft; ST HVAC 92 hp, 65.4 lb-ft
Cargo bed1,000 lb capacity, tilting
Towing2,500 lb, 2-inch receiver
Wheel travel12.7 in front (all models)
Wheelbase90.7 in RIDGE; 122.2 in RIDGE CREW
Fuel tankNearly 13 gallons
Winch (Platinum, Lifted)4,500 lb, synthetic rope
MSRPRIDGE $21,599; RIDGE CREW $23,599; LIFTED EDITION $25,999; CREW LIFTED EDITION $28,799; CREW PLATINUM SPORT HVAC $39,999
AvailabilityLate Summer / Early Fall 2026

By Cali Biker Club News · Published · 2 min read

Kawasaki's in-line-four RIDGE work side x side adds a RIDGE CREW Platinum Sport HVAC with piggyback shocks and cameras, and two-door and CREW Lifted Editions with mud tires, snorkels and a winch. Prices run from $21,599 to $39,999.

The RIDGE is Kawasaki's premium work side x side, and its selling point has always been comfort: a 999cc in-line four, an automotive-style cabin and, on HVAC models, a sealed full cab with heat and air conditioning. For 2027 Kawasaki keeps that base and adds three new versions aimed at two very different jobs: long days between worksites, and mud.

Every RIDGE keeps the same core numbers: 116 hp (measured to ISO 4106, which Kawasaki notes can read higher than SAE) and 73.8 lb-ft of torque, a 1,000-lb tilting cargo bed and a 2,500-lb towing capacity. RIDGE models are assembled in the USA from foreign and domestic parts and carry Kawasaki's 3-year limited warranty.

New: RIDGE CREW Platinum Sport HVAC

This one is for crews that cover ground. It uses KYB piggyback shocks in place of the twin-tube units on standard models, with single-rate 73 N/mm springs and settings tuned for about 20 to 30 mph. Wheel travel is unchanged at 12.7 inches front and rear. Arched lower A-arms add clearance over rocks and roots, and a rear stabilizer joins the front one to cut body roll with a full load.

It rides on 30-inch Maxxis Carnivore 8-ply radial tires with bronze 14-inch wheels, and adds a front brush guard, a 4,500-lb winch, front and rear cameras, front bucket seats, a flip-up IR-cut windshield and an 8-inch Garmin Tread 2 with wireless Apple CarPlay. The redesigned bed measures 35.0 x 41.5 x 12.2 inches with covered side storage built into the bed walls. It seats five and costs $39,999 in Metallic Matte Twilight Blue.

New: RIDGE and RIDGE CREW Lifted Edition

The Lifted Editions are built for muddy worksites. They get 30-inch ITP Cryptid mud tires on 14-inch wheels, elevated snorkel intakes and CVT exhaust ducts, HDPE underbody guards, floor drain holes, KYB piggyback shocks and no front sway bar, which lets the wheels articulate more at low speed. Low gear in the CVT is geared shorter for poor traction.

On the two-door, ground clearance rises to 14.2 inches at standard preload and 14.6 inches at maximum, against 13.4 and 14.4 inches on a standard RIDGE. A 4,500-lb winch and a hitch receiver are standard. Prices are $25,999 for the two-door and $28,799 for the CREW, both in Sunbeam Red and Super Black.

Changes across the range

For 2027 the CVT settings cut engine rpm further at medium and higher speeds, the speeds used when driving between job sites, to lower noise in the cab. Three power modes, Work, Normal and Sport, change throttle response; Work mode is the one for creeping up to a trailer hitch. 4WD and front and rear differential locks are selected electrically on the move.

What it means for you

  • Ranch and farm crews: the Platinum Sport HVAC is the comfort pick for long days with people and tools on board. The standard RIDGE CREW HVAC is $32,999 if you do not need the cameras, winch and upgraded shocks.
  • Mud and wet ground: the Lifted Editions are the ones with snorkels, mud tires and drain holes. Mud tires wear faster on gravel and pavement, so budget for them.
  • Bed sizes differ: the standard bed measures 34.6 x 49 x 12.8 inches, while the release gives 35.0 x 41.5 x 12.2 inches for the redesigned Platinum Sport bed and 27.6 x 41.5 x 12.2 inches for the Lifted Edition bed. Measure pallets and coolers before you choose.
  • Service: the oil filter is reached by removing the fender panel ahead of the rear wheel, and the air filter is under the bench seat (rear bench on CREW HVAC models). The fuel tank holds nearly 13 gallons.

All 13 versions on the price list were due in late summer or early fall 2026. Our RIDGE news page will collect Kawasaki's RIDGE releases.

Written by Cali Biker Club News in our own words from the manufacturer's official release. Specs and prices are the manufacturer's; check the release for the full details.

More from Kawasaki

Kawasaki →

About Cali Biker Club News

Cali Biker Club News covers new models, recalls, rider technology and service news for riders researching the bike they own or may buy. We work from official manufacturer press materials, credit and link every source, and write in our own words.

Press contact

Editor
ReV
Email
media@calibiker.club
For press & manufacturers →