KTM PowerParts steering damper with orange end caps, mounted beside the fork of a KTM Super Duke R
Photo: KTM

KTM· KTM PowerParts steering damper 16181T01E

KTM recalls PowerParts steering damper 16181T01E on Super Duke R models: what owners should do

Released
Oct 15, 2026
Release type
Recall

Official release: IMPROVEMENT OF KTM POWERPART STEERING DAMPER (part no. 16181T01E): RECALL FOR PROACTIVE UPDATE (KTM, Oct 15, 2026). Credited and linked; not a review.

By Cali Biker Club News · Published · 2 min read

KTM is recalling the accessory PowerParts steering damper, part no. 16181T01E, sold for 1290 and 1390 Super Duke R and R EVO models. Dealers add threadlocker to its screw connection for free; owners have to book it.

KTM has issued a recall for one of its own accessories: the KTM PowerParts steering damper with part number 16181T01E. The notice, dated October 15, 2026 and published on KTM's press site, applies to all markets. It is not about the motorcycles themselves. It covers the add-on damper that some owners of recent Super Duke R models bought and fitted, so plenty of Super Duke owners are not affected at all.

KTM calls the action a proactive update. In its words, it is a quality improvement measure meant to improve the damper's reliability and long-term performance. The notice does not describe a specific failure, incident or injury.

Which bikes the damper fits

The 16181T01E damper is listed as compatible with four models. If your bike is one of these AND it has this PowerParts damper fitted, the recall applies to you:

  • KTM 1290 SUPER DUKE R, model years 2020 to 2023
  • KTM 1290 SUPER DUKE R EVO, model years 2022 to 2023
  • KTM 1390 SUPER DUKE R, model years 2024 to 2026
  • KTM 1390 SUPER DUKE R EVO, model years 2024 to 2026

Because it is an accessory rather than standard equipment, the damper could have been fitted by a dealer when the bike was new, added later by a previous owner, or bought and installed by you. If you bought your Super Duke used, it is worth checking even if you never ordered PowerParts yourself.

What KTM is changing

According to the notice, KTM's ongoing quality monitoring and product development led it to further optimize the damper's screw connection and introduce an improved specification. The fix on existing parts is straightforward: an authorized KTM dealer applies threadlocker to the steering damper's screw connection.

The update is free of charge, and KTM says it is carried out only by its authorized dealer network.

What owners should do

The notice puts the first step on the owner. KTM asks customers to check whether they have the affected steering damper and, if they do, to contact an authorized KTM dealer and book an appointment for the update. The notice does not say that KTM will contact owners directly, so do not wait for a letter.

  • Check whether your bike has a KTM PowerParts steering damper fitted. The part number concerned is 16181T01E.
  • Not sure? Ask a KTM dealer to check when you call. Have your VIN ready.
  • Book the update with an authorized KTM dealer. KTM's website has a dealer locator.
  • Until it is done, treat it like any recall item: a steering damper sits right at the front end, so get it booked rather than putting it off.

Because KTM says the remedy is carried out only by its authorized dealers, this is not a do-it-yourself job, even if you are handy with threadlocker and a torque wrench.

Keep a record

Recall and service-campaign work is part of a bike's history, and buyers ask about it. Once the update is done, keep the dealer's paperwork. If you use My Garage on Cali Biker Club, you can add the visit to your bike's service records so it stays with the bike if you ever sell it.

For the full notice, read KTM's official release (linked on this page). For model background, see the 1290 Super Duke R Bike Dossier.

Written by Cali Biker Club News in our own words from the manufacturer's official release. Specs and prices are the manufacturer's; check the release for the full details.

More from KTM

KTM →

About Cali Biker Club News

Cali Biker Club News covers new models, recalls, rider technology and service news for riders researching the bike they own or may buy. We work from official manufacturer press materials, credit and link every source, and write in our own words.

Press contact

Editor
David Schmunk
Email
media@calibiker.club
For press & manufacturers →